현재 위치
home > HPE ARUBA [에이치피이-아루바] > 스위치 > 5510 시리즈 > [HPE FLEXNETWORK][JH145A] 5510 24G 4SFP+HI [L3 관리형/24포트/광10G 4포트/듀얼 파워/이중화/오픈플로우/라우팅/스태킹/랙마운트//][Management/24port/4SFP+/MPLS/VPLS/OPENFLOW/OSPF/IRF/ROUTING/SNMP/MIRRING/ARUBA AIRWAVE/ARUBA CENTRAL/OSPF/Layer3/RACK]

[HPE FLEXNETWORK][JH145A] 5510 24G 4SFP+HI [L3 관리형/24포트/광10G 4포트/듀얼 파워/이중화/오픈플로우/라우팅/스태킹/랙마운트//][Management/24port/4SFP+/MPLS/VPLS/OPENFLOW/OSPF/IRF/ROUTING/SNMP/MIRRING/ARUBA AIRWAVE/ARUBA CENTRAL/OSPF/Layer3/RACK]

상품 옵션
판매가격
가격 견적 문의
      0
      주문하기 장바구니 담기 찜하기

      detail prdoduct - 상품상세설명

       

      HPE FlexNetwork 5510 HI Switch Series
      The HPE FlexNetwork 5510 HI Switch Series comprises Gigabit Ethernet switches that deliver resiliency, security, and multiservice support capabilities at the edge layer of data center, large campus, and metro Ethernet networks.

      With Intelligent Resilient Fabric (IRF) support and available dual power supplies, the HPE FlexNetwork 5510 HI Series Switch can
      deliver high levels of resiliency and manageability. In addition, the PoE+ models provide up to 1440 W of PoE+ power with the dual
      power supply configuration.

      Designed with four fixed 10GbE ports and supports additional modular uplinks, these switches can provide up to six 10GbE uplink
      ports. With complete IPv4/IPv6, OpenFlow, and MPLS/VPLS features, the series provides investment protection with an easy
      transition from IPv4 to IPv6 networks.
      Key features
      • Scalable with 10 Gigabit uplinks and 9-chassis IRF with up to 160 GB/s stacking bandwidth
      • 40G QSFP+ ports for uplink or stacking
      • 4 convenient built-in SFP+ 10GbE uplinks provide performance for bandwidth hungry applications
      • PoE+ for up to 30 Wa
      Standard Features
       Features and benefits
       Software-defined networking 
      • OpenFlow
      supports OpenFlow 1.3 specification to enable SDN by allowing separation of the data (packet forwarding) and control
      (routing decision) paths
      Quality of Service (QoS)
      • Advanced classifier-based QoS
      classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting
      priority level and rate limit to selected traffic on a per-port or per-VLAN basis
      • Traffic policing
      supports Committed Access Rate (CAR) and line rate
      • Powerful QoS feature
      creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS)
      precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing,
      weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round
      robin (WDRR), SP+WDRR, and SP+WFQ
      • Storm restraint
      allows limitation of broadcast, multicast, and unknown unicast traffic rate to reduce unwanted broadcast traffic on the
      network
      • Broadcast control
      allows limitations of broadcast traffic rate to cut down on unwanted network broadcast traffic
      Management
      • Friendly port names
      allows assignment of descriptive names to ports
      • sFlow (RFC 3176)
      provides scalable ASIC-based wirespeed network monitoring and accounting with no impact on network performance; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes
      • Complete session logging
      provides detailed information for problem identification and resolution
      • Remote configuration and management
      enables configuration and management through a CLI located on a remote device
      • Manager and operator privilege levels
      provides read-only (operator) and read/write (manager) access on CLI management interfaces
      • Management VLAN
      segments traffic to and from management interfaces, including CLI/Telnet and SNMP
      • Command authorization
      leverages RADIUS/HWTACACS to link a custom list of CLI commands to an individual network administrator's login; also provides an audit trail
      • Remote monitoring (RMON)
      uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a private alarm extension group
      • Multiple configuration files
      stores easily to the flash image
      • Remote intelligent mirroring
      mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network
      • In-service software upgrade (ISSU)
      enables operators to perform upgrades in the shortest possible amount of time with reduced risk to network operations or traffic disruptions In-service software upgrade (ISSU)+A29
      enables operators to perform upgrades in the shortest possible amount of time with reduced risk to network operations or traffic disruptions
      • Network Management
      SNMP v1/v2c/v3, MIB-II with Traps, and RADIUS Authentication Client MIB (RFC 2618); embedded HTML management tool with secure access
      • IPv6 management
      provides future-proof networking because the switch is capable of being managed whether the attached network is running IPv4 or IPv6; supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, syslogv6, FTPv6, SNMPv6, DHCPv6, and RADIUS for IPv6
      • Troubleshooting
      ingress and egress port monitoring enables network problem-solving; virtual cable tests provide visibility into cable problems
      • HPE Intelligent Management Center (IMC)
      integrates fault management, element configuration, and network monitoring from a central vantage point; built-in support for third-party devices enables network administrators to centrally manage all network elements with a variety of automated tasks, including discovery, categorization, baseline configurations, and software images; the software also provides configuration comparison tools, version tracking, change alerts, and more
      Management
      • Auto-MDIX
      automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
      • Packet storm protection
      protects against broadcast, multicast, or unicast storms with user-defined thresholds
      • Ethernet operations, administration and maintenance (OAM)
      detects data link layer problems that occurred in the "last mile" using the IEEE 802.3ah OAM standard; monitors the status of the link between two devices
      • Flow control
      provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations
      • Fixed 10GbE ports
      provides four fixed SFP+ ports for a 20 GbE connection to the network without the need for additional extension interface modules
      • Optional 10GbE or 40GbE ports
      deliver, through the use of optional modules, additional 10GbE or 40GbE connections, which are available for uplinks or high-bandwidth server connections; flexibly support copper, SFP+, or 40GbE QSFP+ connections
      • Jumbo packet support
      supports up to 10000-byte frame size to improve the performance of large data transfers
      • IEEE 802.3at Power over Ethernet (PoE+)
      provides up to 30 W per port that allows support of the latest PoE+-capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments
      Performance
      • Hardware-based wirespeed access control lists (ACLs)
      help provide high levels of security and ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation
      • Nonblocking architecture
      delivers up to 336 Gb/s of wire-speed switching with a nonblocking switching fabric and up to 250 million pps throughput
      Virtual private network (VPN)
      • Generic Routing Encapsulation (GRE)
      transports Layer 2 connectivity over a Layer 3 path in a secured way; enables the segregation of traffic from site to site
      Resiliency and high availability
      • Separate data and control paths
      separates control from services and keeps service processing isolated; increases security and performance
      • Device Link Detection Protocol (DLDP)
      monitors link connectivity and shuts down ports at both ends if unidirectional traffic is detected, preventing loops in STPbased networks
      • Intelligent Resilient Fabric (IRF)
      creates virtual resilient switching fabrics, where two to nine switches perform as a single L2 switch and L3 router; switches do not have to be co-located and can be part of a disaster-recovery system; servers or switches can be attached using standard LACP for automatic load balancing and high availability; can eliminate need for complex protocols like Spanning
      Tree Protocol, Equal-Cost Multipath (ECMP), or VRRP, thereby simplifying network operation
      • Rapid Ring Protection Protocol (RRPP)
      connects multiple switches in a high-performance ring using standard Ethernet technology; traffic can be rerouted around the ring in less than 50 ms, reducing the impact on traffic and applications
      • Smart Link
      Allows under 100ms failover between links
      • Virtual Router Redundancy Protocol (VRRP)
      allows groups of two routers to dynamically back each other up to create highly available routed environments
      • IRF Capability
      provides single IP address management for a resilient virtual switching fabric of up to nine switches using up to 160 Gb/s bidirectional using QSFP+ links
      • Spanning Tree/PVST+, MSTP, RSTP
      provides redundant links while preventing network loops
      • Internal Dual Redundant Power Supply
      provides high reliability by keeping network up while delivering up to 1440 Watts of PoE+
      Manageability
      • Dual flash images
      provides independent primary and secondary operating system files for backup while upgrading
      • Multiple configuration files
      allow multiple configuration files to be stored to a flash image
      • Troubleshooting
      allows ingress and egress port monitoring, enabling network problem solving; virtual cable tests provide visibility into cable problems
      • IPv6 management
      future-proofs networking, as the switch is capable of being managed whether the attached network is running IPv4 or IPv6; supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, and ARPv6
      Layer 2 switching
      • GARP VLAN Registration Protocol
      allows automatic learning and dynamic assignment of VLANs
      • IP multicast snooping and data-driven IGMP
      automatically prevents flooding of IP multicast traffic
      • Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) protocol snooping
      controls and manages the flooding of multicast packets in a Layer 2 network
      • 32K MAC addresses
      provide access to many Layer 2 devices
      • IEEE 802.1ad QinQ and selective QinQ
      increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed campus or metro network
      • 10GbE port aggregation
      allows grouping of ports to increase overall data throughput to a remote device
      • Spanning Tree/MSTP, RSTP, and STP root guard
      prevent network loops
      • 64 MSTP instances
      allow multiple configurations of STP per VLAN group
      • Isolation at data link layer with private VLANs
      provides, through a two-tier VLAN structure, an additional layer of protection, simplifying network configuration while saving VLAN resources
      • VLAN support and tagging
      supports the IEEE 802.1Q (4094 VLAN IDs)
      Layer 3 services
      • Address Resolution Protocol (ARP)
      determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
      • Dynamic Host Configuration Protocol (DHCP)
      simplifies the management of large IP networks; supports client; DHCP Relay enables DHCP operation across subnets
      • Loopback interface address
      defines an address that can always be reachable, improving diagnostic capability
      • User Datagram Protocol (UDP) helper function
      allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP
      • Route maps
      provide more control during route redistribution; allow filtering and altering of route metrics
      • DHCP server
      centralizes and reduces the cost of the IPv4 address management
      Layer 3 routing
      • IPv4 routing protocols
      support static routes, RIP, OSPF, ISIS, and BGP
      • IPv6 routing protocols
      provide routing of IPv6 at wire speed; support static routes, RIPng, OSPFv3, IS-ISv6, and BGP4+ for IPv6
      • PIM-SSM, PIM-DM, and PIM-SM (for IPv4 and IPv6)
      support IP Multicast address management and inhibition of DoS attacks
      • MPLS support
      provides extended support of MPLS, including MPLS VPNs and MPLS Traffic Engineering (MPLS TE)
      • Virtual Private LAN Service (VPLS)
      establishes point-to-multipoint Layer 2 VPNs across a provider network
      • Bidirectional Forwarding Detection (BFD)
      enables link connectivity monitoring and reduces network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, MPLS, and IRF
      • Policy-based routing
      makes routing decisions based on policies set by the network administrator
      • Equal-Cost Multipath (ECMP)
      enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth
      • IPv6 tunneling
      allows a smooth transition from IPv4 to IPv6 by encapsulating IPv6 traffic over an existing IPv4 infrastructure
      Security
      • Access control lists (ACLs)
      provide IP Layer 2 to Layer 4 traffic filtering; support global ACL, VLAN ACL, port ACL, and IPv6 ACL; up to 3K ingress ACLs and 1K egress ACLs are supported
      • IEEE 802.1X
      defines an industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server
      • MAC-based authentication
      client is authenticated with the RADIUS server based on the client's MAC address
      • Identity-driven security and access control
      − Per-user ACLs
      permits or denies user access to specific network resources based on user identity and time of day, allowing multiple types of users on the same network to access specific network services without risking network security or providing unauthorized access to sensitive data
      − Automatic VLAN assignment
      automatically assigns users to the appropriate VLAN based on their identities
      • Port security
      allows access only to specified MAC addresses, which can be learned or specified by the administrator
      • Secure FTP/ SCP
      allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
      • STP BPDU port protection
      blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
      • DHCP protection
      blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
      • DHCP snooping
      helps ensure that DHCP clients receive IP addresses from authorized DHCP servers and maintain a list of DHCP entries for trusted ports; prevents reception of fake IP addresses and reduces ARP attacks, improving security
      • DHCPv6 snooping
      ensures that DHCPv6 clients obtain IPv6 addresses from authorized DHCPv6 servers and record IP-to-MAC mappings of DHCPv6 clients
      • Dynamic ARP protection
      blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
      • STP root guard
      protects the root bridge from malicious attacks or configuration mistakes
      • Guest VLAN
      provides a browser-based environment to authenticated clients that is similar to IEEE 802.1X
      • Port isolation
      secures and adds privacy, and prevents malicious attackers from obtaining user information
      • Endpoint Admission Defense (EAD)
      provides security policies to users accessing a network
      • RADIUS/HWTACACS
      eases switch management security administration by using a password authentication server
      • Secure management access
      delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, HTTPS and/or SNMPv3
      • Unicast Reverse Path Forwarding (URPF)
      allows normal packets to be forwarded correctly, but discards the attaching packet due to lack of reverse path route or incorrect inbound interface; prevents source spoofing and distributed attacks; supports distributed URPF
      • IP source guard
      helps prevent IP spoofing attacks
      • IPv6 source guard
      help prevent IPv6 spoofing attacks using ND Snooping as well as DHCPv6 Snooping
      • ND Snooping
      allows only packets with a legally obtained IPv6 address to pass
      Convergence
      • LLDP-MED (Media Endpoint Discovery)
      defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones
      • Internet Group Management Protocol (IGMP)
      utilizes Any-Source Multicast (ASM) or Source-Specific Multicast (SSM) to manage IPv4 multicast networks; supports IGMPv1, v2, and v3
      • IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
      facilitates easy mapping using network management applications with LLDP automated device discovery protocol
      • Multicast Source Discovery Protocol (MSDP)
      allows multiple PIM-SM domains to interoperate; is used for inter-domain multicast applications
      • Multicast VLAN
      allows multiple VLANs to receive the same IPv4 or IPv6 multicast traffic, lessening network bandwidth demand by reducing or eliminating multiple streams to each VLAN
      • LLDP-CDP compatibility
      receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation
      • IEEE 802.3at Power over Ethernet (PoE+)
      provides up to 30 W per port that allows support of the latest PoE+-capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments
      • PoE allocations
      supports multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user-specified) to allocate PoE power for more efficient energy savings
      • Voice VLAN
      automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance
      • IP multicast snooping (data-driven IGMP)
      prevents flooding of IP multicast traffic
      Additional information 
      • Green initiative support
      provides support for RoHS and WEEE regulations
      • Green IT and power
      improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and utilizes variable-speed fans, reducing energy costs
      • Unified Hewlett Packard Enterprise Comware operating system with modular architecture
      provides an easy-to-enhance-and-extend feature set, which doesn't require whole-scale changes; all switching, routing, and security platforms leverage the Comware OS, a common unified modular operating system
      • Energy Efficient Ethernet (EEE) support
      Reduces power consumption in accordance with IEEE 802.3az
      Warranty and support
      • Limited Lifetime Warranty
      See http://www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.
      • Software releases
      to find software for your product, refer to http://www.hpe.com/networking/support; for details on the software releases available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary

      review board - 상품후기 전체보기

      review 작성 폼
      review board
      이 름 :
      평점 :      
      내 용 :
      후기쓰기
      review 리스트
      이름
      내용
      평점
      날짜

      QnA board - 상품문의 전체보기 상품문의

      QnA 리스트
      등록된 문의가 없습니다.

      review board - 상품후기

      review 리스트
      등록된 리뷰가 없습니다.


      비밀번호 확인 닫기