현재 위치
home > HPE ARUBA [에이치피이-아루바] > 스위치 > 5130 HI/EI 시리즈 > [HPE FLEXNETWORK][JH324A] 5130 48G 4SFP+ 1-slot HI [L2+ 관리형/기가 48포트/광10G 4포트/오픈슬롯/전원이중화/모니터링/라우팅/스태킹/랙마운트][Management/48port/4SFP+/STACKING/RIP/ROUTING/SNMP/MIRRING/ARUBA AIRWAVE/ARUBA CENTRAL/REDUNDANT/RACK]

[HPE FLEXNETWORK][JH324A] 5130 48G 4SFP+ 1-slot HI [L2+ 관리형/기가 48포트/광10G 4포트/오픈슬롯/전원이중화/모니터링/라우팅/스태킹/랙마운트][Management/48port/4SFP+/STACKING/RIP/ROUTING/SNMP/MIRRING/ARUBA AIRWAVE/ARUBA CENTRAL/REDUNDANT/RACK]

상품 옵션
판매가격
가격 문의
      0
      주문하기 장바구니 담기 찜하기

      detail prdoduct - 상품상세설명

       

      HPE FlexNetwork 5130 HI Switch Series
      PRODUCT OVERVIEW
      The HPE FlexNetwork 5130 HI Switch Series comprises Gigabit Ethernet switches that support static and RIP Layer 3 routing, diversified services, and IPv6 forwarding, as well as provide four 10-Gigabit Ethernet (10GbE) interfaces. 
      Unique Intelligent Resilient Fabric (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability, while reducing operational complexity. These switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in small data centers.
      High availability, simplified management, and comprehensive security control policies are among the key features that distinguish this series. This switch also supports dual modular power supplies.
      Standard Features
       Features and benefits
       Software-defined networking 
      • OpenFlow supports
      OpenFlow 1.3 specification to enable SDN by allowing separation of the data (packet forwarding) and control (routing decision) paths
      Management
      • Remote configuration and management
      enables configuration and management through a secure CLI located on a remote device
      • Manager and operator privilege levels
      provides read-only (operator) and read/write (manager) access on CLI management interfaces
      • Command authorization
      leverages RADIUS/HWTACACS to link a custom list of CLI commands to an individual network administrator's login; also provides an audit trail
      • Multiple configuration files
      stores easily to the flash image
      • Complete session logging
      provides detailed information for problem identification and resolution
      • Remote monitoring (RMON)
      uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a private alarm extension group
      • IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
      advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
      • sFlow (RFC 3176)
      provides scalable ASIC-based wirespeed network monitoring and accounting with no impact on network performance; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes
      • Management VLAN
      segments traffic to and from management interfaces, including CLI/Telnet and SNMP
      • Remote intelligent mirroring
      mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network
      • Device Link Detection Protocol (DLDP)
      monitors a cable between two compatible switches and shuts down the ports on both ends if the cable is broken, which prevents network problems such as loops
      • IPv6 management
      provides future-proof networking because the switch is capable of being managed whether the attached network is running IPv4 or IPv6; supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, syslogv6, FTPv6, SNMPv6, DHCPv6, and RADIUS for IPv6
      • Troubleshooting
      ingress and egress port monitoring enables network problem-solving; virtual cable tests provide visibility into cable problems
      • HPE Intelligent Management Center (IMC)
      integrates fault management, element configuration, and network monitoring from a central vantage point; built-in support for third-party devices enables network administrators to centrally manage all network elements with a variety of automated tasks, including discovery, categorization, baseline configurations, and software images; the software also provides configuration comparison tools, version tracking, change alerts, and more
      • Network Management
      SNMP v1/v2c/v3, MIB-II with Traps, and RADIUS Authentication Client MIB (RFC 2618); embedded HTML management tool with secure access
      Security 
      • Access control lists (ACLs)
      provides IP Layer 2 to Layer 4 traffic filtering; supports global ACL, VLAN ACL, port ACL, and IPv6 ACL
      • IEEE 802.1X
      industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server
      • MAC-based authentication
      client is authenticated with the RADIUS server based on the client's MAC address
      • Identity-driven security and access control
       − Per-user ACLs
       permits or denies user access to specific network resources based on user identity and time of day, allowing multiple types of users on the same network to access specific network services without risking network security or providing unauthorized access to sensitive data
       − Automatic VLAN assignment
       automatically assigns users to the appropriate VLAN based on their identities
      • Secure management access
      delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, HTTPS and/or SNMPv3
      • Secure FTP/ SCP
      allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
      • Guest VLAN
      provides a browser-based environment to authenticated clients that is similar to IEEE 802.1X
      • Port security
      allows access only to specified MAC addresses, which can be learned or specified by the administrator
      • Port isolation
      secures and adds privacy, and prevents malicious attackers from obtaining user information
      • STP BPDU
      port protection blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
      • STP root guard
      protects the root bridge from malicious attacks or configuration mistakes
      • DHCP protection
      blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
      • IP source guard
      helps prevent IP spoofing attacks • Dynamic ARP protection blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data • RADIUS/HWTACACS eases switch management security administration by using a password authentication server • Endpoint Admission Defense (EAD) provides security policies to users accessing a network • IPv6 source guard help prevent IPv6 spoofing attacks using ND Snooping as well as DHCPv6 Snooping
      Quality of Service (QoS) 
      • Broadcast control
      allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
      • Advanced classifier-based QoS
      classifies traffic using multiple match criteria based on Layers 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or entire switch
      • Powerful QoS feature
      supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), and SP+WRR
      • Traffic policing
      supports Committed Access Rate (CAR) and line rate
      Connectivity
      • Auto-MDIX
      automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
      • Flow control
      provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations
      • High-density connectivity
      provides up to 48 fixed 10/100/1000BASE-T ports in a Layer 2/Lite Layer 3 switch
      • IEEE 802.3at Power over Ethernet (PoE+) support
      simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location
      • Ethernet operations, administration and maintenance (OAM)
      detects data link layer problems that occurred in the "last mile" using the IEEE 802.3ah OAM standard; monitors the status of the link between two devices
      Performance
      • Nonblocking architecture
      up to 216 Gb/s nonblocking switching fabric provides wirespeed switching with up to 190.5 million pps throughput
      • Hardware-based wirespeed access control lists (ACLs)
      help provide high levels of security and ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation
      Resiliency and high availability
      • Separate data and control paths
      separates control from services and keeps service processing isolated; increases security and performance
      • Smart Link
      allows under 100ms failover between links
      • Spanning Tree/PVST+, MSTP, RSTP
      provides redundant links while preventing network loops
      • Intelligent Resilient Fabric (IRF)
      creates virtual resilient switching fabrics, where two to nine switches perform as a single L2 switch and L3 router; switches do not have to be co-located and can be part of a disaster-recovery system; servers or switches can be attached using standard LACP for automatic load balancing and high availability; can eliminate need for complex protocols like Spanning Tree Protocol, Equal-Cost Multipath (ECMP), or VRRP, thereby simplifying network operation
      • Internal Dual Redundant Power Supply
      provides high reliability by keeping network up while delivering up to 1440 Watts of PoE+
      Layer 2 switching
      • 32K MAC address table
      provides access to many Layer 2 devices
      • VLAN support and tagging
      supports IEEE 802.1Q with 4,094 simultaneous VLAN IDs
      • IEEE 802.1ad QinQ and selective QinQ
      increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed campus or metro network
      • 10GbE port aggregation
      allows grouping of ports to increase overall data throughput to a remote device
      • Device Link Detection Protocol (DLDP)
      monitors link connectivity and shuts down ports at both ends if unidirectional traffic is detected, preventing loops in STPbased networks
      • Jumbo frame support
      improves the performance of large data transfers; supports frame size of up to 9K-bytes
      Layer 3 services
      • Address Resolution Protocol (ARP)
      determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
      • Dynamic Host Configuration Protocol (DHCP)
      simplifies the management of large IP networks; supports client; DHCP Relay enables DHCP operation across subnets
      • Loopback interface address
      defines an address that can always be reachable, improving diagnostic capability
      • User Datagram Protocol (UDP) helper function
      allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP
      • Route maps
      provide more control during route redistribution; allow filtering and altering of route metrics
      • DHCP server
      centralizes and reduces the cost of IPv4 address management
      • Policy Based Routing
      provides a mechanism for indicating and executing forwarding/routing of data packets based on the policies defined by the network administrator
      Layer 3 routing
      • Static IP routing
      provides manually configured routing for both IPv4 and IPv6 networks
      • Routing Information Protocol (RIP)
      uses a distance vector algorithm with UDP packets for route determination; supports RIPv1 and RIPv2 routing; includes loop protection
      • Policy Based Routing
      provides a mechanism for indicating and executing forwarding/routing of data packets based on the policies defined by the network administrator
      Convergence
      • IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
      facilitates easy mapping using network management applications with LLDP automated device discovery protocol
      • LLDP-MED (Media Endpoint Discovery)
      defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones
      • LLDP-CDP compatibility
      receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation
      • IEEE 802.3at Power over Ethernet (PoE+)
      provides up to 30 W per port that allows support of the latest PoE+-capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments
      • PoE allocations
      supports multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user-specified) to allocate PoE power for more efficient energy savings
      • Voice VLAN
      automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance
      • IP multicast snooping (data-driven IGMP)
      prevents flooding of IP multicast traffic
      • Multicast Source Discovery Protocol (MSDP)
      allows multiple PIM-SM domains to interoperate; is used for inter-domain multicast applications
      Device support
      • Pre-standard PoE support
      detects and provides power to pre-standard PoE devices such as wireless LAN access points and IP phones
      Manageability
      • Dual flash images
      provides independent primary and secondary operating system files for backup while upgrading
      • Multiple configuration files
      allow multiple configuration files to be stored to a flash image
      • IPv6 management
      future-proofs networking, as the switch is capable of being managed whether the attached network is running IPv4 or IPv6; supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, and ARPv6
      • Troubleshooting
      allows ingress and egress port monitoring, enabling network problem solving; virtual cable tests provide visibility into cable problems
      Additional information
      • Green IT and power
      improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and utilizes variable-speed fans, reducing energy costs
      Green initiative support
      provides support for RoHS and WEEE regulations
      • Unified Hewlett Packard Enterprise Comware operating system with modular architecture
      provides an easy-to-enhance-and-extend feature set, which doesn't require whole-scale changes; all switching, routing, and security platforms leverage the Comware OS, a common unified modular operating system
      • Energy Efficient Ethernet (EEE) support
      Reduces power consumption in accordance with IEEE 802.3az
      Warranty and support
      • Limited Lifetime Warranty
      See http://www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.
      • Software releases
      to find software for your product, refer to http://www.hpe.com/networking/support; for details on the software releases available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary

      review board - 상품후기 전체보기

      review 작성 폼
      review board
      이 름 :
      평점 :      
      내 용 :
      후기쓰기
      review 리스트
      이름
      내용
      평점
      날짜

      QnA board - 상품문의 전체보기 상품문의

      QnA 리스트
      등록된 문의가 없습니다.

      review board - 상품후기

      review 리스트
      등록된 리뷰가 없습니다.


      비밀번호 확인 닫기